umenzi weZiXhobo zokuGwaba zobuNgcali

Amava okwenziwa kweMinyaka engama-25

10 5/8 Inch Tci Tricone Drill Bit Iadc 537 Rock Bit Factory Factory Ixabiso eliThengisiweyo Lokwembiwa kwaManzi

10 5/8 Intshi yeTci Tricone Drill Bit Iadc 537 Rock Bit Factory Factory Ixabiso liThengisiwe Lokwembiwa kwaManzi kuMfanekiso obonakalayo
  • 10 5/8 Inch Tci Tricone Drill Bit Iadc 537 Rock Bit Factory Factory Ixabiso eliThengisiweyo Lokwembiwa kwaManzi
  • 10 5/8 Inch Tci Tricone Drill Bit Iadc 537 Rock Bit Factory Factory Ixabiso eliThengisiweyo Lokwembiwa kwaManzi
  • 10 5/8 Inch Tci Tricone Drill Bit Iadc 537 Rock Bit Factory Factory Ixabiso eliThengisiweyo Lokwembiwa kwaManzi

Inkcazelo emfutshane:

Imizi-mveliso eSebenzayo: Imisebenzi yolwakhiwo , Amandla & neMigodi
Ubungakanani: 10 5/8 intshi, 269.9mm
Uhlobo lomsonto: 6 5/8″ PIN API REG
IADC 517/537/617/637
Ubunzima (KG): 75
Igama lebrand: JCDRILL
Uhlobo lomatshini: Izixhobo Zokubhola
Izinto: Intsimbi yeManganese ephezulu
Uhlobo Lokuqhuba: Ukuqulunqa
Ukusetyenziswa: Ukuqhuba kakuhle
MOQ: Iqhekeza eli-1
Ukupakisha: Ityala lomthi

  • FOB ixabiso:US $0.5 - 9,999 / Iqhekeza
  • Min.Ubungakanani boMyalelo:100 Iqhekeza / Iingceba
  • Ukubonelela ngezakhono:10000 Iqhekeza/Amaqhekeza ngenyanga

    • Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Iinkcukacha zeMveliso

    Isicelo

    Amasuntswana e-Tricone, abanye abanokuthi bawabize ngokuba ngamasuntswana e-roller cone okanye ii-tri-cone bits, I-roller cone bits sesona sixhobo sisetyenziswa kakhulu ekugrumbeni i-petroleum kunye nokwembiwa komhlaba.Isuntswana le-Tricone linomsebenzi wokuphembelela, ukutyumza kunye nokucheba ilitye ekubunjweni, ngoko ke liyakwazi ukuziqhelanisa nokwakheka okuthambileyo, okuphakathi kunye nokuqina.Intwana yecone inokohlulwa ibe yi-milling (amazinyo entsimbi) icone bit kunye ne-TCI cone bit ngokohlobo lwamazinyo.

    Iimpawu

    1. Unyango lobushushu obuphezulu buyinkohliso.

    2. Amazinyo eCarbide anamandla aphezulu kunye nokuqina asebenza ngokufanelekileyo.

    3. Imilebe yempama yezinyo eqinile kunye ne-alloy eqinile, Ukuthintela ngokufanelekileyo ukugqobhoza kunye nokukrazula umsebenzi.

    4. Ukukhuselwa kweNtloko ye-OD ukunciphisa ngokufanelekileyo ukunxiba kwentloko kwi-abrasive formation kunye nokwandisa umsebenzi omncinci.

    I-5.Ijethi ye-Directional yandisa indawo yokuhamba esecaleni kunye noncedo lokucoca umngxuma ongezantsi kunye nokunyuka kwe-ROP.

    6. Ukhuseleko lwenkqubo yokuthambisa yokuthwala kunye nenkqubo yokutywina yebit yandisa ubomi bomsebenzi.

    7. API REG Connection.

    I-TRICONE-BITS-ADVANTAGE

    Tricone bits Ulwakhiwo

    i-tricone-bits-structure

    IsiKhokelo se-Tricone Bit Choice

    IADC WOB(KN/mm) RPM(r/min) IIFOMU EZISEBENZAYO
    114/116/117 0.3~0,75 180~60 Ulwakhiwo oluthambileyo kakhulu olunamandla aphantsi oxinzelelo kunye nokugrumba okuphezulu, njengodongwe, ilitye lodaka, itshokhwe, njl.
    124/126/127 0.3~0,85 180~60 Ulwakhiwo oluthambileyo olunamandla aphantsi acinezelayo kunye nokugrumba okuphezulu, okunje ngelitye lodaka, igypsum, ityuwa, ilimestone ethambileyo, njl.
    134/135/136/137 0.3~0.95 150~60 Ulwakhiwo oluthambileyo ukuya oluphakathi olunamandla aphantsi acinezelayo kunye nokuqhutywa okuphezulu, okunje nge-shale ethambileyo ephakathi, igypsum eqinile, ilimestone ethambileyo ephakathi, ilitye lentlabathi elithambileyo eliphakathi, ukwakheka okuthambileyo okunonxibelelwano oluqinileyo, njl.
    214/215/216/217 0.35~0,95 150~60 Ulwakhiwo oluphakathi olunamandla okucinezela okuphezulu, okunje nge-shale ethambileyo ephakathi, igypsum eqinileyo, ilimestone ethambileyo ephakathi, ilitye lentlabathi elithambileyo eliphakathi, ukwakheka okuthambileyo kunye ne-interbed eqinile, njl.
    227 0.35~0,95 150~50 Ubume bobunzima obuphakathi obunamandla acinezelayo aphezulu, anje nge-abrasive shale, limestone, sandstone, dolomite, hard gypsum, marble, etc.
    Qaphela: Imida ephezulu ye-WOB kunye ne-RPM kwitheyibhile engentla kufuneka ingasetyenziswa ngaxeshanye.

    Isikhokelo se-tricone Bits ChoiceUhlobo lwezinyo lwe-Tricone Bits
    Izinto ezigqwesileyo 3 7/8 Tricone Bit Roller Cone Well Drilling Bit Roller Cones Cutter Bit

    Ubungakanani beBits

    Ubungakanani beBit API REG PIN Torque Ubunzima
    Intshi mm Intshi KN.M IiKgs
    3 3/8 85.7 2 3/8 4.1-4.7 4.0-6.0
    3 1/2 88.9 4.2-6.2
    3 7/8 98.4 4.8-6.8
    4 1/4 108 5.0-7.5
    4 1/2 114.3 5.4-8.0
    4 5/8 117.5 2 7/8 6.1-7.5 7.5-8.0
    4 3/4 120.7 7.5-8.0
    5 1/8 130.2 3 1/2 9.5-12.2 10.3-11.5
    5 1/4 133.4 10.7-12.0
    5 5/8 142.9 12.6-13.5
    5 7/8 149.2 13.2-13.5
    6 152.4 13.6-14.5
    6 1/8 155.6 14.0-15.0
    6 1/4 158.8 14.4-18.0
    6 1/2 165.1 14.5-20.0
    6 3/4 171.5 20.0-22.0
    7 1/2 190.5 4 1/2 16.3-21.7 28.0-32.0
    7 5/8 193.7 32.3-34.0
    7 7/8 200 33.2-35.0
    8 3/8 212.7 38.5-41.5
    8 1/2 215.9 39.0-42.0
    8 5/8 219.1 40.5-42.5
    8 3/4 222.3 40.8-43.0
    9 1/2 241.3 6 5/8 38-43.4 61.5-64.0
    9 5/8 244.5 61.8-65.0
    9 7/8 250.8 62.0-67.0
    10 254 68.0-75.0
    10 1/2 266.7 72.0-80.0
    10 5/8 269.9 72.0-80.0
    11 1/2 292.1 79.0-90.0
    11 5/8 295.3 79.0-90.0
    12 1/4 311.2 95.0-102.
    12 3/8 314.3 95.0-102.2
    12 1/2 317.5 96.0-103.0
    13 1/2 342.9 105.0-134.0
    13 5/8 346.1 108.0-137.0
    14 3/4 374.7 7 5/8 46.1-54.2 140.0-160.0
    15 381 145.0-165.0
    15 1/2 393.7 160.0-180.0
    16 406.4 200.0-220.0
    17 1/2 444.5 260.0-280.0
    26 660.4 725.0-780.0

    I-TCI TRICONE BITS KWIPROJEKTHI

    i-tci-tricone-bit

    Imigaqo yoRhwebo yeMveliso

    Ubuncinci boMyinge woMyalelo N / A
    Ixabiso
    Iinkcukacha zokuPakisha Ipakethe yokuThunyelelwa koMgangatho wokuThunyelwa ngaphandle
    Ixesha lokuzisa iintsuku ezisi-7
    Immimiselo yokuhlawula T/T
    Supply Ability Ngokusekelwe kuMyalelo oneenkcukacha
  • Ngaphambili:
  • Okulandelayo:

    • IIMVELISO EZINXULUMENEYO