umenzi weZiXhobo zokuGwaba zobuNgcali

Amava okwenziwa kweMinyaka engama-25

3 7/8 Intshi yeTungsten Carbide Faka iBit yeTricone yeQula laManzi kunye nokuGqiba okuPhambili

3 7/8 Intshi yeTungsten Carbide Faka iBit yeTricone yeQela laManzi kunye noCongo loKwemba uMfanekiso ofakiweyo
  • 3 7/8 Intshi yeTungsten Carbide Faka iBit yeTricone yeQula laManzi kunye nokuGqiba okuPhambili
  • 3 7/8 Intshi yeTungsten Carbide Faka iBit yeTricone yeQula laManzi kunye nokuGqiba okuPhambili
  • 3 7/8 Intshi yeTungsten Carbide Faka iBit yeTricone yeQula laManzi kunye nokuGqiba okuPhambili

Inkcazelo emfutshane:

Imizi-mveliso eSebenzayo: Imisebenzi yolwakhiwo , Amandla & neMigodi
Ubunzima (KG): 8
Igama lebrand: JCDRILL
Uhlobo lomatshini: Izixhobo Zokubhola
Izinto: Intsimbi yeManganese ephezulu
Uhlobo Lokuqhuba: Ukuqulunqa
Sebenzisa: Well Drilling
Igama lemveliso: I-TCI ye-tricone bit
Ukusetyenziswa: Ukuqhuba kakuhle
Ubungakanani: 3 7/8 intshi
Uhlobo lomsonto: 2 3/8 API REG
Ukupakisha: Ityala lomthi

  • FOB ixabiso:US $0.5 - 9,999 / Iqhekeza
  • Min.Ubungakanani boMyalelo:100 Iqhekeza / Iingceba
  • Ukubonelela ngezakhono:10000 Iqhekeza/Amaqhekeza ngenyanga

    • Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Iinkcukacha zeMveliso

    Isicelo

    Amasuntswana e-Tricone, abanye abasenokuwabiza ngokuba ngamasuntswana e-roller cone okanye ii-tri-cone bits, aneekhoni ezintathu.Ikhowuni nganye inokujikeleziswa ngokuzimeleyo xa umtya wokubhola ujikeleza umzimba wesuntswana.Iicones zineebheringi eziqengqelekayo ezifakwe ngexesha lokuhlanganisa.Iibhithi zokusika eziqengqelekayo zingasetyenziselwa ukugrumba naziphi na iifom ukuba i-cutter efanelekileyo, i-bearing, kunye ne-nozzle ikhethiwe.

    Iimpawu

    1. Amandla kunye nokuxhatshazwa kokugqoka okufakwayo kuphuculwe ngokusebenzisa i-carbide efakwe ngamandla amakhulu kunye nokuxhatshazwa okuphezulu.
    2. Umphezulu wokuchaneka okuphezulu okunobushushu obuphathwayo ngokusebenzisa inkqubo yonyango yobushushu obuphambili ukuphucula umthamo womthwalo kunye nobomi benkonzo yokuthwala.
    3. Ubomi benkonzo yebheringi bandiswa ngakumbi ngokwamkela izinto eziqinileyo nezinganyangekiyo ukuze zithwale ithrasti.
    4. Olu luhlu lwe-oyile kakuhle isuntswana lelitye sebenzisa itywina lokuzala isakhiwo.Ngee-roller ezicwangciswe kwiigrooves ezifakwe kwi-cone body, ubukhulu bejenali yokuthwala buyanda.
    6. Imiphezulu ethwele i-Thrust inobuso obunzima kwaye iphathwa ngeteknoloji yokunciphisa i-friction.
    7. Amasuntswana e-Rotary drill asebenzisa ijenali.Intloko ejongene lukhuni.Ikhowuni ethwele inlared nge friction recing alloy kunye ne silver-plated.Umthamo womthwalo kunye nokuxhathisa ukubanjwa kokuthwala kuphuculwe kakhulu.

    I-TRICONE-BITS-ADVANTAGE

    Tricone bits Ulwakhiwo

    i-tricone-bits-structure

    IsiKhokelo se-Tricone Bit Choice

    IADC WOB(KN/mm) RPM(r/min) IIFOMU EZISEBENZAYO
    114/116/117 0.3~0,75 180~60 Ulwakhiwo oluthambileyo kakhulu olunamandla aphantsi oxinzelelo kunye nokugrumba okuphezulu, njengodongwe, ilitye lodaka, itshokhwe, njl.
    124/126/127 0.3~0,85 180~60 Ulwakhiwo oluthambileyo olunamandla aphantsi acinezelayo kunye nokugrumba okuphezulu, okunje ngelitye lodaka, igypsum, ityuwa, ilimestone ethambileyo, njl.
    134/135/136/137 0.3~0.95 150~60 Ulwakhiwo oluthambileyo ukuya oluphakathi olunamandla aphantsi acinezelayo kunye nokuqhutywa okuphezulu, okunje nge-shale ethambileyo ephakathi, igypsum eqinile, ilimestone ethambileyo ephakathi, ilitye lentlabathi elithambileyo eliphakathi, ukwakheka okuthambileyo okunonxibelelwano oluqinileyo, njl.
    214/215/216/217 0.35~0,95 150~60 Ulwakhiwo oluphakathi olunamandla okucinezela okuphezulu, okunje nge-shale ethambileyo ephakathi, igypsum eqinileyo, ilimestone ethambileyo ephakathi, ilitye lentlabathi elithambileyo eliphakathi, ukwakheka okuthambileyo kunye ne-interbed eqinile, njl.
    227 0.35~0,95 150~50 Ubume bobunzima obuphakathi obunamandla acinezelayo aphezulu, anje nge-abrasive shale, limestone, sandstone, dolomite, hard gypsum, marble, etc.
    Qaphela: Imida ephezulu ye-WOB kunye ne-RPM kwitheyibhile engentla kufuneka ingasetyenziswa ngaxeshanye.

    Isikhokelo se-tricone Bits ChoiceUhlobo lwezinyo lwe-Tricone Bits
    Izinto ezigqwesileyo 3 7/8 Tricone Bit Roller Cone Well Drilling Bit Roller Cones Cutter Bit

    Ubungakanani beBits

    Ubungakanani beBit API REG PIN Torque Ubunzima
    Intshi mm Intshi KN.M IiKgs
    3 3/8 85.7 2 3/8 4.1-4.7 4.0-6.0
    3 1/2 88.9 4.2-6.2
    3 7/8 98.4 4.8-6.8
    4 1/4 108 5.0-7.5
    4 1/2 114.3 5.4-8.0
    4 5/8 117.5 2 7/8 6.1-7.5 7.5-8.0
    4 3/4 120.7 7.5-8.0
    5 1/8 130.2 3 1/2 9.5-12.2 10.3-11.5
    5 1/4 133.4 10.7-12.0
    5 5/8 142.9 12.6-13.5
    5 7/8 149.2 13.2-13.5
    6 152.4 13.6-14.5
    6 1/8 155.6 14.0-15.0
    6 1/4 158.8 14.4-18.0
    6 1/2 165.1 14.5-20.0
    6 3/4 171.5 20.0-22.0
    7 1/2 190.5 4 1/2 16.3-21.7 28.0-32.0
    7 5/8 193.7 32.3-34.0
    7 7/8 200 33.2-35.0
    8 3/8 212.7 38.5-41.5
    8 1/2 215.9 39.0-42.0
    8 5/8 219.1 40.5-42.5
    8 3/4 222.3 40.8-43.0
    9 1/2 241.3 6 5/8 38-43.4 61.5-64.0
    9 5/8 244.5 61.8-65.0
    9 7/8 250.8 62.0-67.0
    10 254 68.0-75.0
    10 1/2 266.7 72.0-80.0
    10 5/8 269.9 72.0-80.0
    11 1/2 292.1 79.0-90.0
    11 5/8 295.3 79.0-90.0
    12 1/4 311.2 95.0-102.
    12 3/8 314.3 95.0-102.2
    12 1/2 317.5 96.0-103.0
    13 1/2 342.9 105.0-134.0
    13 5/8 346.1 108.0-137.0
    14 3/4 374.7 7 5/8 46.1-54.2 140.0-160.0
    15 381 145.0-165.0
    15 1/2 393.7 160.0-180.0
    16 406.4 200.0-220.0
    17 1/2 444.5 260.0-280.0
    26 660.4 725.0-780.0

    Inkqubo yeMveliso

    I-Tricone-bits-production-process

  • Ngaphambili:
  • Okulandelayo:

    • IIMVELISO EZINXULUMENEYO