umenzi weZiXhobo zokuGwaba zobuNgcali

Amava okwenziwa kweMinyaka engama-25

26 Inch Iadc 537 Drill Bit Manufacturer Irabha etywiniweyo iTci Tricone Bit

26 Inch Iadc 537 Drill Bit Manufacturers
  • 26 Inch Iadc 537 Drill Bit Manufacturer Irabha etywiniweyo iTci Tricone Bit
  • 26 Inch Iadc 537 Drill Bit Manufacturer Irabha etywiniweyo iTci Tricone Bit
  • 26 Inch Iadc 537 Drill Bit Manufacturer Irabha etywiniweyo iTci Tricone Bit

Inkcazelo emfutshane:

Imizi-mveliso eSebenzayo: Imisebenzi yolwakhiwo , Amandla & neMigodi
Ubungakanani: 26 intshi 660.4mm
Uhlobo lomsonto: 7 5/8″ PIN API REG
IADC 517
Ubunzima (KG): 810
Igama lebrand: JCDRILL
Ukuthwala uhlobo Irabha etywiniweyo
Ukupakisha Ibhokisi yoMthi engenafumigation
Ulwakhiwo Medium Hard Formation

  • FOB ixabiso:US $0.5 - 9,999 / Iqhekeza
  • Min.Ubungakanani boMyalelo:100 Iqhekeza / Iingceba
  • Ukubonelela ngezakhono:10000 Iqhekeza/Amaqhekeza ngenyanga

    • Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Iinkcukacha zeMveliso

    Isicelo

    Amasuntswana e-Tricone, abanye abasenokuwabiza ngokuba ngamasuntswana e-roller cone okanye ii-tri-cone bits, aneekhoni ezintathu.Ikhowuni nganye inokujikeleziswa ngokuzimeleyo xa umtya wokubhola ujikeleza umzimba wesuntswana.Iicones zineebheringi eziqengqelekayo ezifakwe ngexesha lokuhlanganisa.Iibhithi zokusika eziqengqelekayo zingasetyenziselwa ukugrumba naziphi na iifom ukuba i-cutter efanelekileyo, i-bearing, kunye ne-nozzle ikhethiwe.

    26inch-rock-roller-bits

    Inzuzo

    1. Amazinyo e-carbide aphezulu kunye nokuqina okuphezulu asetyenziselwa ukuphucula ukuchasana kwempembelelo yamazinyo kunye nokunciphisa izinyo.
    izinga lokuqhekeka;
    2. Inombolo yezinyo eyilwe ngokugqibeleleyo, inombolo yezinyo, ubude bezinyo obuveziweyo kunye nemilo ye-alloy ye-alloy yezinyo inika umdlalo opheleleyo
    ukukwazi ukusika kunye nesantya sokusika i-drill bit;
    3. Isetyenziswa kakhulu kuphononongo lwe-petroleum, ukuhlola imigodi, imithombo ye-geothermal, i-hydrological exploration kunye nezinye iindawo.
    Inkampani yethu inokubonelela ngezisombululo ezithile ngokweyona meko yokwemba, kwaye yenza ngokwezifiso amasuntswana edrill adityanisiweyo ayo nayiphi na imeko.
    Idayamitha, kubandakanywa amasuntswana omatshini wokomba obubanzi obubanzi, iindidi ezahlukeneyo zamasuntswana okomba, amasuntswana okubuyisela, ukomba olukhomba indlela
    amasuntswana, njl.

    i-soft-formation-tricone-bit

    IsiKhokelo se-Tricone Bit Choice

    IADC WOB(KN/mm) RPM(r/min) IIFOMU EZISEBENZAYO
    114/116/117 0.3~0,75 180~60 Ulwakhiwo oluthambileyo kakhulu olunamandla aphantsi oxinzelelo kunye nokugrumba okuphezulu, njengodongwe, ilitye lodaka, itshokhwe, njl.
    124/126/127 0.3~0,85 180~60 Ulwakhiwo oluthambileyo olunamandla aphantsi acinezelayo kunye nokugrumba okuphezulu, okunje ngelitye lodaka, igypsum, ityuwa, ilimestone ethambileyo, njl.
    134/135/136/137 0.3~0.95 150~60 Ulwakhiwo oluthambileyo ukuya oluphakathi olunamandla aphantsi acinezelayo kunye nokuqhutywa okuphezulu, okunje nge-shale ethambileyo ephakathi, igypsum eqinile, ilimestone ethambileyo ephakathi, ilitye lentlabathi elithambileyo eliphakathi, ukwakheka okuthambileyo okunonxibelelwano oluqinileyo, njl.
    214/215/216/217 0.35~0,95 150~60 Ulwakhiwo oluphakathi olunamandla okucinezela okuphezulu, okunje nge-shale ethambileyo ephakathi, igypsum eqinileyo, ilimestone ethambileyo ephakathi, ilitye lentlabathi elithambileyo eliphakathi, ukwakheka okuthambileyo kunye ne-interbed eqinile, njl.
    227 0.35~0,95 150~50 Ubume bobunzima obuphakathi obunamandla acinezelayo aphezulu, anje nge-abrasive shale, limestone, sandstone, dolomite, hard gypsum, marble, etc.
    Qaphela: Imida ephezulu ye-WOB kunye ne-RPM kwitheyibhile engentla kufuneka ingasetyenziswa ngaxeshanye.

    Isikhokelo se-tricone Bits ChoiceUhlobo lwezinyo lwe-Tricone Bits
    Izinto ezigqwesileyo 3 7/8 Tricone Bit Roller Cone Well Drilling Bit Roller Cones Cutter Bit

    Ubungakanani beBits

    Ubungakanani beBit API REG PIN Torque Ubunzima
    Intshi mm Intshi KN.M IiKgs
    3 3/8 85.7 2 3/8 4.1-4.7 4.0-6.0
    3 1/2 88.9 4.2-6.2
    3 7/8 98.4 4.8-6.8
    4 1/4 108 5.0-7.5
    4 1/2 114.3 5.4-8.0
    4 5/8 117.5 2 7/8 6.1-7.5 7.5-8.0
    4 3/4 120.7 7.5-8.0
    5 1/8 130.2 3 1/2 9.5-12.2 10.3-11.5
    5 1/4 133.4 10.7-12.0
    5 5/8 142.9 12.6-13.5
    5 7/8 149.2 13.2-13.5
    6 152.4 13.6-14.5
    6 1/8 155.6 14.0-15.0
    6 1/4 158.8 14.4-18.0
    6 1/2 165.1 14.5-20.0
    6 3/4 171.5 20.0-22.0
    7 1/2 190.5 4 1/2 16.3-21.7 28.0-32.0
    7 5/8 193.7 32.3-34.0
    7 7/8 200 33.2-35.0
    8 3/8 212.7 38.5-41.5
    8 1/2 215.9 39.0-42.0
    8 5/8 219.1 40.5-42.5
    8 3/4 222.3 40.8-43.0
    9 1/2 241.3 6 5/8 38-43.4 61.5-64.0
    9 5/8 244.5 61.8-65.0
    9 7/8 250.8 62.0-67.0
    10 254 68.0-75.0
    10 1/2 266.7 72.0-80.0
    10 5/8 269.9 72.0-80.0
    11 1/2 292.1 79.0-90.0
    11 5/8 295.3 79.0-90.0
    12 1/4 311.2 95.0-102.
    12 3/8 314.3 95.0-102.2
    12 1/2 317.5 96.0-103.0
    13 1/2 342.9 105.0-134.0
    13 5/8 346.1 108.0-137.0
    14 3/4 374.7 7 5/8 46.1-54.2 140.0-160.0
    15 381 145.0-165.0
    15 1/2 393.7 160.0-180.0
    16 406.4 200.0-220.0
    17 1/2 444.5 260.0-280.0
    26 660.4 725.0-780.0

    Tricone bits package

    i-tricone-bits-for-well-drilling

    Imigaqo yoRhwebo yeMveliso

    Ubuncinci boMyinge woMyalelo N / A
    Ixabiso
    Iinkcukacha zokuPakisha Ipakethe yokuThunyelelwa koMgangatho wokuThunyelwa ngaphandle
    Ixesha lokuzisa iintsuku ezisi-7
    Immimiselo yokuhlawula T/T
    Supply Ability Ngokusekelwe kuMyalelo oneenkcukacha
  • Ngaphambili:
  • Okulandelayo:

    • IIMVELISO EZINXULUMENEYO