umenzi weZiXhobo zokuGwaba zobuNgcali

Amava okwenziwa kweMinyaka engama-25

7 7/8 Inch Iadc 127 Water Well Milled Tooth Bit

7 7/8 Inch Iadc 127 Water Well Milled Tooth Bit Umboniso ofakiweyo
  • 7 7/8 Inch Iadc 127 Water Well Milled Tooth Bit
  • 7 7/8 Inch Iadc 127 Water Well Milled Tooth Bit
  • 7 7/8 Inch Iadc 127 Water Well Milled Tooth Bit

Inkcazelo emfutshane:

Imizi-mveliso eSebenzayo: Isiseko, iMigodi, uKwebiwa kwamanzi
Ubungakanani: 7 7/8 Intshi,200mm
uQhakamshelwano lomsonto: 4 1/2 API REG PIN
IKHOWUDI ye-IADC: 117,127,217
WOB (Ubunzima kwiBit) 0.35 ~ 1.00 KN/mm
RPM(r/min) 180-80
Uhlobo: Izixhobo zoKwemba, isixhobo sokufumba
Izinto: Intsimbi yeManganese ephezulu
Uhlobo Lokuqhuba: Ukuqulunqa
Umqulu: Ibhokisi yeplywood
Ulwakhiwo Amandla aphantsi okucinezelayo, amandla aphezulu okubhola kunye nokwakheka okuthambileyo, njenge-shale, udongwe, ilitye lesanti, ilitye elithambileyo, ilitye letyuwa, njl.

  • FOB ixabiso:US $0.5 - 9,999 / Iqhekeza
  • Min.Ubungakanani boMyalelo:100 Iqhekeza / Iingceba
  • Ukubonelela ngezakhono:10000 Iqhekeza/Amaqhekeza ngenyanga

    • Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Iinkcukacha zeMveliso

    Isicelo

    Amasuntswana e-Tricone, abanye abasenokuwabiza ngokuba ngamasuntswana e-roller cone okanye ii-tri-cone bits, aneekhoni ezintathu.Ikhowuni nganye inokujikeleziswa ngokuzimeleyo xa umtya wokubhola ujikeleza umzimba wesuntswana.Iicones zineebheringi eziqengqelekayo ezifakwe ngexesha lokuhlanganisa.Iibhithi zokusika eziqengqelekayo zingasetyenziselwa ukugrumba naziphi na iifom ukuba i-cutter efanelekileyo, i-bearing, kunye ne-nozzle ikhethiwe.

    Amasuntswana amazinyo agayiweyo

    1,iindlela ezithambileyo (114-117)

    Ezi bits ziyilelwe ukugrumba ezona kwakheka zithambileyo njengeshale ezithambileyo, iibhedi ezibomvu, kunye nodongwe, ezinokuqina okuphezulu kunye namazinga aphezulu okungena.

    2,Iindlela ezithambileyo ukuya kweziphakathi(121,124,126,134,136,137)

    La masuntswana enzelwe ukugrumba ukumila okunje ngeeshale, ilimestone ethambileyo ephakathi, ilitye lentlabathi eliPhakathi kunye nolunye ulwakhiwo olunemivimbo eqinileyo.

    3,Phakathi ukuya kulwakhiwo olunzima(213,214,215,217)

    La masuntswana enzelwe ukugrumba ukwakheka okunje ngelitye lesanti eliqinileyo, idolomite, kunye nokwakheka okwaphukileyo kunye nemivimbo eqinileyo yecherty.

    intsimbi-tricone-bit

     

    IsiKhokelo se-Tricone Bit Choice

    IADC WOB(KN/mm) RPM(r/min) IIFOMU EZISEBENZAYO
    114/116/117 0.3~0,75 180~60 Ulwakhiwo oluthambileyo kakhulu olunamandla aphantsi oxinzelelo kunye nokugrumba okuphezulu, njengodongwe, ilitye lodaka, itshokhwe, njl.
    124/126/127 0.3~0,85 180~60 Ulwakhiwo oluthambileyo olunamandla aphantsi acinezelayo kunye nokugrumba okuphezulu, okunje ngelitye lodaka, igypsum, ityuwa, ilimestone ethambileyo, njl.
    134/135/136/137 0.3~0.95 150~60 Ulwakhiwo oluthambileyo ukuya oluphakathi olunamandla aphantsi acinezelayo kunye nokuqhutywa okuphezulu, okunje nge-shale ethambileyo ephakathi, igypsum eqinile, ilimestone ethambileyo ephakathi, ilitye lentlabathi elithambileyo eliphakathi, ukwakheka okuthambileyo okunonxibelelwano oluqinileyo, njl.
    214/215/216/217 0.35~0,95 150~60 Ulwakhiwo oluphakathi olunamandla okucinezela okuphezulu, okunje nge-shale ethambileyo ephakathi, igypsum eqinileyo, ilimestone ethambileyo ephakathi, ilitye lentlabathi elithambileyo eliphakathi, ukwakheka okuthambileyo kunye ne-interbed eqinile, njl.
    227 0.35~0,95 150~50 Ubume bobunzima obuphakathi obunamandla acinezelayo aphezulu, anje nge-abrasive shale, limestone, sandstone, dolomite, hard gypsum, marble, etc.
    Qaphela: Imida ephezulu ye-WOB kunye ne-RPM kwitheyibhile engentla kufuneka ingasetyenziswa ngaxeshanye.

    Isikhokelo se-tricone Bits ChoiceUhlobo lwezinyo lwe-Tricone Bits
    Izinto ezigqwesileyo 3 7/8 Tricone Bit Roller Cone Well Drilling Bit Roller Cones Cutter Bit

    Ubungakanani beBits

    Ubungakanani beBit API REG PIN Torque Ubunzima
    Intshi mm Intshi KN.M IiKgs
    3 3/8 85.7 2 3/8 4.1-4.7 4.0-6.0
    3 1/2 88.9 4.2-6.2
    3 7/8 98.4 4.8-6.8
    4 1/4 108 5.0-7.5
    4 1/2 114.3 5.4-8.0
    4 5/8 117.5 2 7/8 6.1-7.5 7.5-8.0
    4 3/4 120.7 7.5-8.0
    5 1/8 130.2 3 1/2 9.5-12.2 10.3-11.5
    5 1/4 133.4 10.7-12.0
    5 5/8 142.9 12.6-13.5
    5 7/8 149.2 13.2-13.5
    6 152.4 13.6-14.5
    6 1/8 155.6 14.0-15.0
    6 1/4 158.8 14.4-18.0
    6 1/2 165.1 14.5-20.0
    6 3/4 171.5 20.0-22.0
    7 1/2 190.5 4 1/2 16.3-21.7 28.0-32.0
    7 5/8 193.7 32.3-34.0
    7 7/8 200 33.2-35.0
    8 3/8 212.7 38.5-41.5
    8 1/2 215.9 39.0-42.0
    8 5/8 219.1 40.5-42.5
    8 3/4 222.3 40.8-43.0
    9 1/2 241.3 6 5/8 38-43.4 61.5-64.0
    9 5/8 244.5 61.8-65.0
    9 7/8 250.8 62.0-67.0
    10 254 68.0-75.0
    10 1/2 266.7 72.0-80.0
    10 5/8 269.9 72.0-80.0
    11 1/2 292.1 79.0-90.0
    11 5/8 295.3 79.0-90.0
    12 1/4 311.2 95.0-102.
    12 3/8 314.3 95.0-102.2
    12 1/2 317.5 96.0-103.0
    13 1/2 342.9 105.0-134.0
    13 5/8 346.1 108.0-137.0
    14 3/4 374.7 7 5/8 46.1-54.2 140.0-160.0
    15 381 145.0-165.0
    15 1/2 393.7 160.0-180.0
    16 406.4 200.0-220.0
    17 1/2 444.5 260.0-280.0
    26 660.4 725.0-780.0

    Inkqubo yeMveliso

    i-tricone-bits-in-project

    Imigaqo yoRhwebo yeMveliso

    Ubuncinci boMyinge woMyalelo N / A
    Ixabiso
    Iinkcukacha zokuPakisha Ipakethe yokuThunyelelwa koMgangatho wokuThunyelwa ngaphandle
    Ixesha lokuzisa iintsuku ezisi-7
    Immimiselo yokuhlawula T/T
    Supply Ability Ngokusekelwe kuMyalelo oneenkcukacha
  • Ngaphambili:
  • Okulandelayo:

    • IIMVELISO EZINXULUMENEYO