| Umbala | mnyama, Mthubi | Igama lemveliso | ibhawudi yeankile |
| Gqiba | Khanyile(Ayigqutywanga) | Ukusetyenziswa | Ukuzinzisa ukuthambeka, imfumba encinci, isikhonkwane somhlaba, iiankile yamatye |
| Inkqubo yoMlinganiso | Metric | Amagama angundoqo 1 | intonga ye-ankile |
| Igama lebrand | JCDRILL | Amagama angundoqo 2 | self-drilling intonga iankile |
| Izinto eziphathekayo | Intsimbi | Amagama angundoqo 3 | intonga ye-ankile enemisonto epheleleyo |
| Ububanzi | R25, R32, R38, R51, T30, T40, T52, T76, T103 | Igama 1 | ilitye lelitye |
| Umthamo | Umthamo ophezulu womthwalo | Igama 2 | ibha yeankile engenanto |
| Umgangatho | ISO | Igama 3 | iintonga iankile |
Intshayelelo
Inkcazo yeMveliso eneenkcukacha
| Igama: | Isixhobo sobuNjineli bomhlaba se-R25N Self Drilling Anchor Hex Nut | Isicelo: | Ukwembiwa kwamalahle, iTunneling, iSlope Foundation kunye ne-Hydroelectric |
| Unyango loMphezulu: | I-Hot Dig iGalvanized | Izinto: | C45/40Cr |
| Umsonto: | R25N | Ubungakanani obungundoqo: | 75mm |
| Ubude: | 70-90mm | Umbala: | Ngokusekelwe kubathengi |
| Ukukhanya okuphezulu: | R25N Steel Hex Nuts, I-70mm ubude bentsimbi ye-hex nuts , I-R25N i-galvanized hex nuts | ||
Isixhobo sobuNjineli bomhlaba se-R25N Self Drilling Anchor Hex Nut
Inkqubo ye-Self Drilling Anchor (SDA) sisisombululo sebholithi kumhlaba onzima kunye neemeko zamatye.Inkqubo ivumela ukugrumba kunye nokugrumba kumsebenzi omnye, okwenza ukonga kakhulu kwindawo yemisebenzi kunye nexesha leprojekthi.Ebandakanya ibha ye-ankile enemisonto enomgobo enemingxuma yokubhola eyenza ukomba, i-ankile kunye negrouting kumsebenzi omnye.Inkqubo ye-ankile yokuzigrumba isetyenziswa ikakhulu ekuzinziseni ithambeka, ukuxhasa itonela kwangaphambili, iziseko ezineengqumba ezincinci njl njl, esetyenziswa ngokubanzi kwiiprojekthi zemigodi, itonela, uloliwe, ulwakhiwo lwemetro njl.njl.
Uphawu:
1. Ukufaka isicelo kuzo zombini ipleyiti edomile kunye nepleyiti ecaba.
2. Onke amantongomane adlula amandla okugqibela e-self-drilling anchor bar.
3. Inokuhlangabezana neemfuno ezingqongqo kwinkcazo ye-ankile.
4. I-galvanizing yediphu eshushu yokukhusela umhlwa.
I-Anchor Nut
| Umzekelo | R25N |
| Ubungakanani obungundoqo (mm) | 41 |
| Ubude (mm) | 41 |
| Ukuqina (HRC) | 20-30 |
| Uhlobo lomsonto | I-R25 |
| Impahla engekasilwa | C45/40Cr |
| Ubunzima beyunithi (kg) | 0.25 |
| Umsonto | I-R25 |
| I-R-Tread-Coupling | ||||
 | Ubungakanani | Dia yangaphandle | Ubude | Ubunzima |
| mm | mm | Kg | ||
| R25N | 36 | 150 | 0.6 | |
| I-R32L | 42 | 145 | 0.8 | |
| I-R32N/1 | 42 | 160 | 0.85 | |
| R32N | ||||
| I-R32S/1 | 42 | 190 | 1.02 | |
| I-R32S | ||||
| I-R38 | 51 | 220 | 1.7 | |
| R51L | 63 | 140 | 1.2 | |
| R51L | 63 | 170 | 1.7 | |
| I-R5IN | 63 | 200 | 19 | |
| I-R5IN | 63 | 220 | 2 | |
Umfanekiso
| Ubuncinci boMyinge woMyalelo | N / A |
| Ixabiso | |
| Iinkcukacha zokuPakisha | Ipakethe yokuThunyelelwa koMgangatho wokuThunyelwa ngaphandle |
| Ixesha lokuzisa | iintsuku ezisi-7 |
| Immimiselo yokuhlawula | T/T |
| Supply Ability | Ngokusekelwe kuMyalelo oneenkcukacha |
