umenzi weZiXhobo zokuGwaba zobuNgcali

Amava okwenziwa kweMinyaka engama-25

13 5/8 Inch Iadc 517 Water Well Tci Tricone Drilling Bit for Low Compressive Power

Inkcazelo emfutshane:

Imizi-mveliso eSebenzayo: Imisebenzi yolwakhiwo , Amandla & neMigodi
Ubungakanani: 13 5/8”,346.0mm
Uhlobo lomsonto: 6 5/8″ PIN API REG
IADC 517/537/617/637
Ubunzima (KG): 137
Igama lebrand: JCDRILL
Ukupakisha ubukhulu 350X350X500 mm
Izinto: Intsimbi yeManganese ephezulu
Ukupakisha Ibhokisi yoMthi engenafumigation
Ukuthwala uhlobo Irabha etywiniweyo
Ulwakhiwo Medium Hard Formation

  • FOB ixabiso:US $0.5 - 9,999 / Iqhekeza
  • Min.Ubungakanani boMyalelo:100 Iqhekeza / Iingceba
  • Ukubonelela ngezakhono:10000 Iqhekeza/Amaqhekeza ngenyanga
  • Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Iinkcukacha zeMveliso

    Iimpawu eziphambili

    1. Kukho i-Tricone efanelekileyo kuyo nayiphi na indlela yokwakhiwa kwamatye
    2. Isuntswana le-Tricone liyaguquguquka kwaye linokumelana nokutshintsha kolwakhiwo
    3. Ii-Tri Cones zinexabiso elifanelekileyo, zihlala ixesha elide kwaye zinezinga elisebenzayo lokomba
    4. Iicones zerola zineebheringi ezitywiniweyo eziphezulu;Umgangatho ophezulu kakhulu we-tungsten carbide kunye nokhuseleko lwegeyiji yedayimane kuyo yonke intwana yokubhoboza kunye nomsila weskirt ojongene nobunzima kunye ne-hydraulics ephuculweyo.Ezi zixhobo ze-roller cone drill zenzelwe ukuya kubunzulu obugqithisileyo kwiimeko ezinzima kunye neemeko apho zingenako ukusilela.

    i-tricone-bits-for-water-well-drilling

    Tricone bits Ulwakhiwo

    i-tci-tricone-bit

    Inkcazo eneenkcukacha yekhowudi yemodeli ye-drill bit
    I-1-I-Milled Tooth Bit, ukwakheka okuthambileyo (amandla aphantsi acinezelayo, ukubhola okuphezulu)
    I-2-I-Milled Tooth Bit, i-milled Tooth Bit, i-medium to medium form form hard (amandla acinezelayo aphezulu)
    I-3-I-Milled Tooth Bit, iQina, i-Abrasive okanye i-Abrasive ephakathi
    4-Faka iBit yezinyo, ukwakheka okuthambileyo (amandla acinezelayo aphantsi, ukuqhutywa okuphezulu)
    5-Faka iBit yezinyo, ethambileyo ukuya kubume obuqinileyo (amandla aphantsi acinezelayo)
    6-Faka iBit yezinyo, ukwakheka okuqinileyo okuphakathi (amandla acinezelayo aphezulu)
    I-7-Faka iBit yezinyo, iQina, i-Abrasive okanye i-Abrasive ephakathi
    8-Faka iBit yezinyo, iqine kakhulu, kubume oburhabaxa kakhulu

    IsiKhokelo se-Tricone Bit Choice

    IADC WOB(KN/mm) RPM(r/min) IIFOMU EZISEBENZAYO
    114/116/117 0.3~0,75 180~60 Ulwakhiwo oluthambileyo kakhulu olunamandla aphantsi oxinzelelo kunye nokugrumba okuphezulu, njengodongwe, ilitye lodaka, itshokhwe, njl.
    124/126/127 0.3~0,85 180~60 Ulwakhiwo oluthambileyo olunamandla aphantsi acinezelayo kunye nokugrumba okuphezulu, okunje ngelitye lodaka, igypsum, ityuwa, ilimestone ethambileyo, njl.
    134/135/136/137 0.3~0.95 150~60 Ulwakhiwo oluthambileyo ukuya oluphakathi olunamandla aphantsi acinezelayo kunye nokuqhutywa okuphezulu, okunje nge-shale ethambileyo ephakathi, igypsum eqinile, ilimestone ethambileyo ephakathi, ilitye lentlabathi elithambileyo eliphakathi, ukwakheka okuthambileyo okunonxibelelwano oluqinileyo, njl.
    214/215/216/217 0.35~0,95 150~60 Ulwakhiwo oluphakathi olunamandla okucinezela okuphezulu, okunje nge-shale ethambileyo ephakathi, igypsum eqinileyo, ilimestone ethambileyo ephakathi, ilitye lentlabathi elithambileyo eliphakathi, ukwakheka okuthambileyo kunye ne-interbed eqinile, njl.
    227 0.35~0,95 150~50 Ubume bobunzima obuphakathi obunamandla acinezelayo aphezulu, anje nge-abrasive shale, limestone, sandstone, dolomite, hard gypsum, marble, etc.
    Qaphela: Imida ephezulu ye-WOB kunye ne-RPM kwitheyibhile engentla kufuneka ingasetyenziswa ngaxeshanye.

    Isikhokelo se-tricone Bits ChoiceUhlobo lwezinyo lwe-Tricone Bits
    Izinto ezigqwesileyo 3 7/8 Tricone Bit Roller Cone Well Drilling Bit Roller Cones Cutter Bit

    Ubungakanani beBits

    Ubungakanani beBit API REG PIN Torque Ubunzima
    Intshi mm Intshi KN.M IiKgs
    3 3/8 85.7 2 3/8 4.1-4.7 4.0-6.0
    3 1/2 88.9 4.2-6.2
    3 7/8 98.4 4.8-6.8
    4 1/4 108 5.0-7.5
    4 1/2 114.3 5.4-8.0
    4 5/8 117.5 2 7/8 6.1-7.5 7.5-8.0
    4 3/4 120.7 7.5-8.0
    5 1/8 130.2 3 1/2 9.5-12.2 10.3-11.5
    5 1/4 133.4 10.7-12.0
    5 5/8 142.9 12.6-13.5
    5 7/8 149.2 13.2-13.5
    6 152.4 13.6-14.5
    6 1/8 155.6 14.0-15.0
    6 1/4 158.8 14.4-18.0
    6 1/2 165.1 14.5-20.0
    6 3/4 171.5 20.0-22.0
    7 1/2 190.5 4 1/2 16.3-21.7 28.0-32.0
    7 5/8 193.7 32.3-34.0
    7 7/8 200 33.2-35.0
    8 3/8 212.7 38.5-41.5
    8 1/2 215.9 39.0-42.0
    8 5/8 219.1 40.5-42.5
    8 3/4 222.3 40.8-43.0
    9 1/2 241.3 6 5/8 38-43.4 61.5-64.0
    9 5/8 244.5 61.8-65.0
    9 7/8 250.8 62.0-67.0
    10 254 68.0-75.0
    10 1/2 266.7 72.0-80.0
    10 5/8 269.9 72.0-80.0
    11 1/2 292.1 79.0-90.0
    11 5/8 295.3 79.0-90.0
    12 1/4 311.2 95.0-102.
    12 3/8 314.3 95.0-102.2
    12 1/2 317.5 96.0-103.0
    13 1/2 342.9 105.0-134.0
    13 5/8 346.1 108.0-137.0
    14 3/4 374.7 7 5/8 46.1-54.2 140.0-160.0
    15 381 145.0-165.0
    15 1/2 393.7 160.0-180.0
    16 406.4 200.0-220.0
    17 1/2 444.5 260.0-280.0
    26 660.4 725.0-780.0

    I-TRICONE BITS PACKAGE

    i-tricone-bits-package

    Imigaqo yoRhwebo yeMveliso

    Ubuncinci boMyinge woMyalelo N / A
    Ixabiso
    Iinkcukacha zokuPakisha Ipakethe yokuThunyelelwa koMgangatho wokuThunyelwa ngaphandle
    Ixesha lokuzisa iintsuku ezisi-7
    Immimiselo yokuhlawula T/T
    Supply Ability Ngokusekelwe kuMyalelo oneenkcukacha

  • Ngaphambili:
  • Okulandelayo: