umenzi weZiXhobo zokuGwaba zobuNgcali

Amava okwenziwa kweMinyaka engama-25

I-15 1/2 I-Inch ye-Iadc 127/217 I-Milled Tooth Tricone Bits yoLwakhiwo oluthambileyo

15 1/2 Intshi ye-Iadc 127/217 I-Milled Tooth Tricone Bits yoLwakhiwo oluthambileyo lomfanekiso
  • I-15 1/2 I-Inch ye-Iadc 127/217 I-Milled Tooth Tricone Bits yoLwakhiwo oluthambileyo
  • I-15 1/2 I-Inch ye-Iadc 127/217 I-Milled Tooth Tricone Bits yoLwakhiwo oluthambileyo
  • I-15 1/2 I-Inch ye-Iadc 127/217 I-Milled Tooth Tricone Bits yoLwakhiwo oluthambileyo

Inkcazelo emfutshane:

Imizi-mveliso eSebenzayo: Isiseko, iMigodi, uKwebiwa kwamanzi
Ubungakanani: 15 1/2 intshi 393.7 mm
uQhakamshelwano lomsonto: 7 5/8 API REG PIN
IKHOWUDI ye-IADC: 117,127,217
WOB (Ubunzima kwiBit) 87.5 ~ 237.5KN
RPM(r/min) 150-60
Uhlobo: Izixhobo zoKwemba, isixhobo sokufumba
Izinto: Intsimbi yeManganese ephezulu
Uhlobo Lokuqhuba: Ukuqulunqa
Umqulu: Ibhokisi yeplywood
Ulwakhiwo Amandla aphantsi okucinezelayo, amandla aphezulu okubhola kunye nokwakheka okuthambileyo, njenge-shale, udongwe, ilitye lesanti, ilitye elithambileyo, ilitye letyuwa, njl.

  • FOB ixabiso:US $0.5 - 9,999 / Iqhekeza
  • Min.Ubungakanani boMyalelo:100 Iqhekeza / Iingceba
  • Ukubonelela ngezakhono:10000 Iqhekeza/Amaqhekeza ngenyanga

    • Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Iinkcukacha zeMveliso

    UKUGQIBELA IZINYO ZINYO
    IADC 1 SERIES I-DRILL BITS
    Ezi bits zisetyenziselwa ukugrumba amandla aphantsi-uxinzelelo, ukwakheka okuthambileyo.Ubude bezinyo olude lwentelekelelo lusetyenziswa kwiikhowuni eziphezulu ze-offset ukunika awona mazinga aphezulu okungena anokubakho.I-hardfacing ekwaziyo ukunxiba isetyenziselwa ukulawula ukuguga kwamazinyo.Kwiintlobo zamasuntswana athambileyo oku kuqina kobuso kugubungela ngokupheleleyo amazinyo amasuntswana.

    IADC 2 SERIES DILL AMAQHINGA

    La masuntswana asetyenziselwa ukugrumba amandla acinezelayo aphezulu, ukwakheka okuqinileyo okuphakathi.Amazinyo amafutshane abonisa ubude obuncitshisiweyo be-crest asetyenziswa kolu luhlu lwe-bit designs.I-hardfacing ehlala ixesha elide isetyenziselwa ukunciphisa ukuguga kwamazinyo.
    IADC 3 SERIES DILL AMAQHINGA
    La masuntswana asetyenziselwa ukugrumba izinto eziqinileyo neziqhumayo.Amazinyo amafutshane kakhulu, asondeleleneyo anobuncinane bobunzima bokuqina asetyenziselwa ukuxhathisa ukophuka.Ezi bits kufuneka zimelane nemithwalo ephezulu kwaye zibhobhoze iifom ze-abrasive ngokutyumza, isenzo sokusika.
    intsimbi-izinyo-tricone-bits

    Itheyibhile yokuhlelwa kobunzima bokwakheka kunye nokukhethwa kwebit

    I-roller cone bit IADC ikhowudi bit diamond Inkcazo yokwakheka Uhlobo lwamatye Amandla acinezelayo
    (Mpa)    		 I-ROP(m/h)
    Ikhowudi ye-IADC
    111/124 M/S112~M/S223 Ithambile kakhulu: incangathi uyilo oluthambileyo olunamandla aphantsi acinezelayo. Udongwe
    Siltstone
    ilitye lesanti    		 <25 >20
    116/137 M/S222~M/S323 Ithambile: Ukwakheka okuthambileyo okunamandla aphantsi oxinzelelo kunye nokuqhutywa okuphezulu. Ilitye lodongwe
    Marl
    Lignite
    ilitye lesanti    		 25~50 10-20
    417/527 M/S323~M/S433 Okuthambileyo okuphakathi:ukuthamba ukuya kophakathi ukwakheka okunamandla aphantsi acinezelayo kunye nenyama yenyama. Ilitye lodongwe
    Marl
    Lignite
    Ilitye lentlabathi
    Siltstone
    I-anhydrite
    I-Tuff    		 50~75 5–15
    517/537 M322~M443 Phakathi:phakathi ukuya kulwakhiwo oluqinileyo olunamandla acinezelayo aphezulu kunye ne-abrasive streak. Ilitye lodaka
    Ilitye elimnyama
    i-shale    		 75-100 2~6
    537/617 M422~M444 Ubunzima obuphakathi:bulukhuni kunye nokwakheka okuxineneyo okunamandla acinezelayo aphezulu kunye nokuqina okuphakathi. Ilitye elimnyama
    I-shale enzima
    I-anhydrite
    Ilitye lentlabathi
    IDolomite    		 100-200 1.5~3

    i-milled-tricone-bit

    Izinyo Lentsimbi Tricone Bits Ubungakanani

    Ubungakanani obuqhelekileyo
    IADC rhoqo
    I-API Reg Pin
    Itorque yokwakheka (Nm)
    3 7/8"(98.4mm)
    126/216/637
    2 3/8
    4100~4700
    4 5/8"(117.4mm)
    126/216/517/537/637
    2 7/8
    6100~7500
    5 1/4"(133.3mm)
    126/216/517/537/637
    3 1/2
    9500~12200
    5 5/8"(142.8mm)
    126/216/517/537/637
    3 1/2
    9500~12200
    5 7/8"(149.2mm)
    126/216/517/537/637
    3 1/2
    9500~12200
    6"(152.4mm)
    126/127/216/517/537/617/637
    3 1/2
    9500~12200
    6 1/4"(158.7mm)
    126/127/216/517/537/617/637
    3 1/2
    9500~12200
    6 1/2"(165mm)
    126/127/216/517/537/617/637
    3 1/2
    9500~12200
    7 1/2"(190mm)
    126/216/517/537
    4 1/2
    16300~21700
    7 5/8"(193mm)
    126/216/517/537
    4 1/2
    16300~21700
    7 7/8"(200mm)
    126/216/517/537
    4 1/2
    16300~21700
    8 1/2"(215.9mm)
    117/127/217/437/517/537/617/637
    4 1/2
    16300~21700
    9 1/2"(241.3mm)
    117/127/217/437/517/537/617/637
    6 5/8
    38000~43400
    9 7/8"(250.8mm)
    117/127/217/437/517/537/617/637
    6 5/8
    38000~43400
    10 5/8(269.8mm)
    117/127/137/217/517/537/617/637
    6 5/8
    38000~43400
    11 5/8(295.3mm)
    117/127/137/217/517/537/617/637
    6 5/8
    38000~43400
    12 1/4"(311.1mm)
    114/127/217/437/517/537/617/637
    6 5/8
    38000~43400
    13 5/8"(346.0mm)
    127/217/517/537/617/637
    6 5/8
    38000~43400
    14 3/4"(374.6mm)
    127/217/517/537/617/637
    7 5/8
    46100~54200
    17 1/2"(444.5mm)
    114/115/125/215/515/535/615/635
    7 5/8
    46100~54200
    26"(660.4mm)
    114/115/125/215/515/535/615
    7 5/8
    46100~54200

    Amanqaku okusetyenziswa kwe-roller cone bits:

    1 .Ngaphambi kokuba i-drill drill ihla, kuyimfuneko ukuqinisekisa ukuba i-bottom of the well is clean, ayinayo i-grit, kwaye akukho ntsimbi ewayo.

    2. Khangela ukuba intambo yokudibanisa i-screw ye-roller cone bit ilungile kwaye umbhobho ufakwe ngokufanelekileyo.

    3. Ukubaleka emngxunyeni kufuneka uzinzile, ugweme uxinzelelo kwaye uthintele ukubhola.

    4. Ilungu lokugqibela lifuna indawo enkulu yokufuduswa ukuze kuqaliswe itafile ejikelezayo kwaye iqhubeke ibuyela ezantsi equleni., Lihlambe ngokupheleleyo iqula ukunqanda inkunkuma ekuvaleni umlomo.

    5. Imilo yomngxuma osezantsi kufuneka icinezelwe kancinci kwaye ijike kancinane ibe ngunxibelelwano nezantsi equleni, uxinzelelo oluncinci, isantya esiphantsi, ukufuduka okukhulu, i-torque encinci, kwaye isantya yi-40 ~ 60 rev / min, ubuncinci ngama-30. imizuzu.

    6. Qinisekisa ubunzima kwi-bit kunye nesantya ngokudibanisa neemeko zangempela zokubunjwa.

    7. Ngexesha lokuqhubela phambili, umsebenzi kufuneka ube mpuluswa, ukutya kwe-drill kufuneka kufane, kunqatshelwe ngokungqongqo ukuphakamisa kunye nokukhulula i-drill ngokukhawuleza, intambo ye-drill ayiqhawuli kakuhle kunye ne-drill string fall free.

    8. Ukuba kufunyenwe ukuba i-drill drill iyeka ukwenza inkqubela phambili, uxinzelelo lwempompo luyanda kwaye luyancipha ngokucacileyo, izinga lokungena liyancipha ngokukhawuleza, kwaye i-torque yanda, phakamisa i-drill ukujonga ngaphandle kokulibazisa.

    i-tricone-bit

    Imigaqo yoRhwebo yeMveliso

    Ubuncinci boMyinge woMyalelo N / A
    Ixabiso
    Iinkcukacha zokuPakisha Ipakethe yokuThunyelelwa koMgangatho wokuThunyelwa ngaphandle
    Ixesha lokuzisa iintsuku ezisi-7
    Immimiselo yokuhlawula T/T
    Supply Ability Ngokusekelwe kuMyalelo oneenkcukacha
  • Ngaphambili:
  • Okulandelayo:

    • IIMVELISO EZINXULUMENEYO